HYTERA to MMDVM Gateway
"gw_hytera_mmdvm"
copyright by DG1HT, DL5DI, OE1KBC

Install DMRGateway & gw_hytera_mmdvm
------------------------------------

1)	Prepare an Raspberry PI with Jessie (tested with RASP 3 Version B and JESSIE LITE 07/2017)
2)	allow root access do not forget "passwd root xxxx"
3)	apt-get upgrade
4)	apt-get update
	apt-get install screen

5)	create /opt/gw_hytera_mmdvm
6)	copy files from DropBox to /opt/gw_hytera_mmdvm
7)	Grant rights with:
	cd /opt/gw_hytera_mmdvm
	chmod 755 gw_hytera_mmdvm

8)	open config file:
	nano gw_hytera_mmdvm.cfg
	modify Location_Name,Location_Latitude,Location_Longitude, SYSOPEMAIL and SYSOP_ID

9)	if you run DMRGateway from G4KLX on this RASPI
	
	DMRGateway_address=127.0.0.1
	DMRGateway_port=62031

	DMRGateway_local_address=127.0.0.1
	DMRGateway_local_port=62032
	
	ready to go
	
10)	create /opt/DMRGateway
11)	Download DMRGateway from Github and bring it to /opt/DMRGateway
12)	cd /opt/DMRGateway
	make
13) open config file:
	nano DMRGateway.ini
	you find one in the DropBiox /opt/DMRGateway


Run DMRGatway & gw_hytera_mmdvm
-------------------------------

1)	Run ssh (PUTTY) first

	create first console:
	screen
	
2)	cd /opt/DMRGateway
3)	./DMRGateway DMRGateway.ini


4)	Run ssh (PUTTY) again

	create second console:
	screen

5)	cd /opt/gw_hytera_mmdvm
6)	./gw_hytera_mmdvm


Do not forgett to change the MASTER-IP to the RASPI Adress within your Hytera. Leave Ports as connected to DMR+ IPSC or DMR+MASTER

After HYTERA is connecting to the Gateway you will see the login Information and DRMGateway connecting to the diferent Networks